Quick Overview The RadiodetectionTX-10 transmitter offers the highest 10 watt power output in the Radiodetection TX range of transmitters. The TX-10 is used to apply an active trace signal to a buried cable or pipe, allowing the operator to use a suitable Radiodetectio

The RadiodetectionTX-10 transmitter offers the highest 10 watt power output in the Radiodetection TX range of transmitters. The TX-10  is used to apply an active trace signal to a buried cable or pipe, allowing the operator to use a suitable Radiodetection underground service locator, in order to trace the signal. The main benefit of a higher power transmitter, such as the TX-10 is that the additional power output allows a higher current to flow in the target line, permitting longer and deeper locations to be performed. The TX-10 offers the highest power within the Radiodetection product family.

All models feature a three-stage phase sensitive amplifier that delivers a constant current across its entire bandwidth in direct connect, clamp or inductive modes.
The TX range is designed to deliver superior performance using minimal power consumption in a light weight and well-balanced, format. The transmitters are light-weight (2.9kg), well-balanced and IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information.

Based on a fully digital platform, the family of Radiodetection transmitters is able to support the full range of Radiodetection RD7100 and RD8100 cable, pipe and RF marker locators.

The TX-10 has the highest power capability of Radiodetection's signal transmitters. The TX-10 features Fault Find as standard, and the TX-5B and TX-10B have Bluetooth capability, which allows for remote control by a suitable locator. Fault find, as is found on this transmitter allows the user to couple the transmitter to an A-Frame in order to facilitate the location of current leakage faults in cables and pipe coatings, which indicate an insulation fault. With the A-Frame attachment, these faults can be pinpointed to an accuracy of up to 10cms with a suitable locator. The Radiodetection TX-10 also permits the use of current direction frequencies, making it suitable to use with any of the RD8100 and RD8000 ranges which have CD (current direction) as a feature.

Applying a locate signal is possible by either direct connection, utilising a signal clamp or by wireless induction, by placing the transmitter on the ground over the buried service

Features:

• Highest Output Power - 10 watts
• Eco Mode - User can limit power output
• Boost Function
• Fault Find - Allows insulation faults to be pinpointed
• 6 Current Direction Frequencies
• 16 Active Frequencies
• 8 Induction Frequencies
• High Voltage Output (30V or 90V) for high impedance loacates
• Optional Li-Ion Rechargeable Battery Pack
• Multimeter Mode
• Clear LCD Display
• Built in Tool Tray
• IP65 rated
• Can utilise direct connect, signal clamp or wireless induction modes